Peavey Speaker Impulse 115 User Manual

SPECIFICATIONS  
Impulse® 115  
Third harmonic:  
100 Hz:  
500 Hz:  
0.78%  
0.58%  
10% rated power  
Second harmonic:  
100 Hz:  
500 Hz:  
3.1%  
2.6%  
Third harmonic:  
100 Hz:  
500 Hz:  
2.6%  
1.2%  
Recommended active crossover  
frequency region and slope:  
150 Hz at 18 dB/octave  
Impedance (Z):  
Nominal:  
Minimum:  
8.0 Ohms  
7.3 Ohms  
Input connections:  
2 x four-pin Neutrik® Speakon®  
inputs in parallel  
1 x eight-pin Neutrik Speakon input  
1 x four-pin Neutrik Speakon thru  
(for use with eight-pin input)  
Enclosure materials and finish:  
3/4" plywood finished with durable  
black HammerHeadpolyurethane  
coating  
Mounting provisions:  
This unit is not designed for  
overhead suspension  
Dimensions (H x W x D):  
Front:  
24.5" x 21.00" x 26.75"  
622 mm x 533 mm x 679 mm  
Net weight:  
74 lbs. (33.6 kg)  
Frequency response, 1 meter on-axis,  
swept-sine in an anechoic  
environment:  
Maximum sound pressure level  
(1 meter):  
124 dB SPL continuous  
130 dB SPL peak  
Features:  
• New Peavey Low Rider 15"  
subwoofer  
• 1600 Watts of program power  
• Extremely low frequency  
response down to 35 Hz  
• Neutrik Speakon professional  
input connectors  
35 Hz to 1.5 kHz ( 3 dB)  
Usable low frequency limit  
(-10 dB point):  
27 Hz  
Transducer complement:  
1 x 15" vented Low Rider® 15"  
subwoofer  
Power handling:  
Box tuning frequency:  
40 Hz  
800 Watts continuous  
1,600 Watts program  
3,200 Watts Peak  
Harmonic distortion:  
1% rated power  
Sound pressure level, 1 Watt, 1 meter  
in an anechoic environment:  
95 dB SPL (2.83 Volt input)  
Second harmonic:  
100 Hz:  
500 Hz:  
0.78%  
0.64%  
 
SPECIFICATIONS  
Impulse® 115  
Amplitude Response (1W 1m On-Axis)  
110  
100  
90  
80  
70  
60  
20  
50  
100  
200  
500  
1k  
2k  
5k  
10k  
20k  
Frequency (Hz)  
Figure 1 Impulse 115  
Impedance  
100  
50  
30  
20  
Z
( )  
10  
5
3
2
1
20  
50  
100  
200  
500  
1k  
2k  
5k  
10k  
20k  
Frequency (Hz)  
Figure 2 IMPULSE 115  
 
Harmonic Distortion : 10% Rated Power  
110  
100  
90  
80  
70  
60  
50  
40  
20  
50  
100  
200  
500  
1k  
2k  
5k  
10k  
20k  
Frequency (Hz)  
2nd Harmonic  
3rd Harmonic  
Figure 3 IMPULSE 115  
Harmonic Distortion : 1% Rated Power  
110  
100  
90  
80  
70  
60  
50  
40  
20  
50  
100  
200  
500  
1k  
2k  
5k  
10k  
20k  
Frequency (Hz)  
2nd Harmonic  
3rd Harmonic  
Figure 4 IMPULSE 115  
Features and specifications subject to change without notice.  
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com  
©2001 Printed in the U.S.A. 8/02  
 

Pelco Car Video System TW300IP User Manual
Philips Car Stereo System AQ4140 User Manual
Philips DVD Recorder HDRW 720 00 02 User Manual
Philips Projector bSure 2 User Manual
Pioneer Flat Panel Television PDP 5000EX User Manual
Planet Technology Network Card ISW 800M User Manual
Polk Audio Speaker System ATRIUM65SDI User Manual
Porter Cable Air Compressor C2004 User Manual
Presonus Audio electronic Stereo Amplifier Microphone Preamplifier User Manual
ProForm Treadmill 307550 User Manual